Primary Beer Regulators

Taprite Regulators continue to meet the various demands of the beverage industry. Robust design delivers performance and reliability. Extremely durable and user friendly polycarbonate bonnets make adjustments a snap! Pull cap to adjust the pressure and push back to lock it in.

The TAPRITE ADVANTAGE

  • Taprite regulators are built and tested in accordance with UL Standard 252 for Compressed Gas Regulators and UL 252A for Compressed Gas Regulator Accessories
  • All Taprite regulator components and accessories are inspected by our Quality Department upon receipt in accordance with the requirements of MIL-STD-105E
  • High CO2 volumetric flow provides continuity in product dispensing
  • Polycarbonate bonnet will not chip, break or fade
  • 10 Micron filter built in to keep contaminants out of regulator
  • One repair kit for primary and secondary

During the Manufacturing process the following tests are conducted:

  • Safety Activation and Blow-Off
  • Leak Testing - all connections of accessories are checked. Bonnet cap, diaphragm and capsule are properly torqued and pressure tested
  • Component testing - gauges, fittings and other accessories are pressure tested once assembled, to insure they are working properly
  • A sampling of each work order is randomly checked for workmanship, safety testing, leak testing and component checks
  • Engineering Lab Testing - production regulators are randomly taken from stock and checked for Pressure Decay and Flow Rate performance criteria

Flow Rite Monitor

  • FC741
    FC741
    Primary Low pressure range for under bar dispensing Adjustment Range: 12-18 PSIG
  • FC741H
    FC741H
    Primary Medium pressure range for cold plate box dispensers Adjustment Range: 30-45 PSIG

750 Series

  • T740SN60
    T740SN60
    Body only, 60 PSI , no fittings, sliver cap
  • T740SN60HP
    T740SN60HP
    Body only, high performance, 60 PSI , no fittings, red cap
  • T741
    T741
    60lb gauge, 5/16" barb shutoff with check valve, silver cap
  • T741HP-G
    T741HP-G
    0-50 PSI, 60lb gauge, tank fitting, high performance, no outlet, red cap
  • T742
    T742
    60lb & 2000lb gauge, tank fitting, 5/16" barb shutoff with check valve, silver cap
  • T742-2
    T742-2
    1P X 2P, 60lb & 2000lb gauge 5/16" barb shutoff with check valve, silver bonnet
  • T742EN
    T742EN
    60lb & 2000lb gauge, Euro tank fitting, ¼" barb outlet, silver cap
  • T742H
    T742H
    60lb gauge, 5/16" barb shutoff with check valve, silver cap
  • T742HP
    T742HP
    0-50 PSI, 60lb & 2000lb gauge, tank fitting, high performance 5/16" barb with duck-bill shutoff with check valve, red cap
  • T742HP-01
    T742HP-01
    0-50 PSI, 60lb & 2000lb gauge, tank fitting, high performance ¼" flare with check valve, red cap
  • T742HP-100
    T742HP-100
    0-50 PSI, 100lb & 2000lb gauge, tank fitting, high performance, ¼" barb shutoff with check valve, red cap
  • T752HP
    T752HP
    2P X 2P, 60lb & 2000lb gauge, tank fitting, high performance, 5/16" barb shutoff with duck-bill check valve, red cap
  • T752HP-01
    T752HP-01
    2P X 2P, 60lb & 2000lb gauge, tank fitting, high performance, ¼" flare with check valve , red cap

Primary Regulator Wall Mount

  • T742JGSA
    T742JGSA
    100lb & 3000lb gauge, ¼" flare inlet, 3/8" with shutoff with inlet, 70PSI safety, silver cap
Copyright © Taprite